Phoenix Inverter VE. Direct 250VA - 1200VA

The Phoenix Inverter VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

VE.Direct communication port

The VE.Direct port can be connected to:

A computer (VE.Direct to USB interface cable needed)

Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

Fully configurable:

Low battery voltage alarm trip and reset levels

Low battery voltage cut-off and restart levels

Dynamic cut-off: load dependent cut-off level

Output voltage 210 – 245V

Frequency 50 Hz or 60 Hz

When in ECO mode, the Phoenix Inverter VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

VictronConnect lets you get live status information and configure your Phoenix Inverter VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.

The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.

Not sure what size inverter you need, why not take a look at our guide to sizing an inverter.