Victron Energy Phoenix Inverter 12/1200 230V VE.Direct Schuko PIN122121210 *with UK adapter*

The Phoenix 12/1200 VE.Direct inverter allows you to power domestic
equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at
12V, 24V or 48V DC.

This unit has the IEC plug.

Features of the Phoenix Inverter 12/1200 VE.Direct

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable
  needed)
• Apple and Android
  smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

• Low battery voltage alarm
  trip and reset levels
• Low battery voltage cut-off
  and restart levels
• Dynamic cut-off: load
  dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO
  mode sense level

Monitoring:

• In- and output voltage, %
  load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its
reliability over many years. The Phoenix Inverter 12/1200 VE.Direct are short
circuit proof and protected against overheating, whether due to overload or
high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen
lamps or electric tools.

ECO mode

When in ECO mode, the Phoenix Inverter 12/375 VE.Direct will switch to
standby when the load decreases below a preset value (min load: 15W). Once in
standby the inverter will switch on for a short period (adjustable, default:
every 2,5 seconds). If the load exceeds a preset level, the inverter will
remain on.

Remote on/off

A remote on/off switch can be connected to a two pole connector, or
between battery plus and the left hand contact of the two pole connector.

DC connection with screw terminals

No special tools needed for installation.

Monitor, operate & control your system

VictronConnect lets you get live status
information and configure your Phoenix Inverter 12/1200 VE.Direct when connected
to a VE.Direct Bluetooth Smart Dongle.

The REC040010210R is the correct controller
for the Phoenix Inverter VE.Directs.

Not sure what size inverter you need, why not take a look at our guide to sizing an inverter.