Name: Victron SmartSolar MPPT RS 450/200
SKU: SCC145120512
Price: 1522.05 GBP
Availability: InStock

The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems.

Available in a 5.76kW and 11.52kW model, features include a wide 65-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernise the presentation in line with the latest suite of Victron products.

MPPT: Ultra Fast Maximum Power Point Tracking

The SmartSolar RS solar charge controller connects to a PV array of between 65 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.

The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more.

Setup and monitor with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect app. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

Daisy Chain Additional Units

The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy chained” to each other with an RJ45 cable.

When connected to each other, all individual charge controllers, will synchronise their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.

If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Display

The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.

Weight	16.5 kg
Brand	Victron Energy
Weight	16.5
Data Communication Port	VE.Direct port, VE.Can port & Bluetooth
Efficiency	96%

FAQ

How do I choose the right Victron inverter charger for my needs?

To understand which size inverter you require, you will need to work out the wattage to match your requirements. To do this, you will need to add up the wattage of each 230V appliance you want to use, and find out their rated power draw. Usually the item manual will provide the wattage draw.

It’s likely you’ll want to use more than one appliance at a time. It is therefore important to factor the total wattage into your inverter calculations.

Example:

If you have a laptop which is 60W, a TV which is 51W, and a coffee machine which is 1400W, then your maximum power usage would be 1511W.

Once you’ve added up the total appliance wattage, add 20%. This will tell you the minimum size inverter you’ll require.

It is important to note that Victron Energy rate their inverters in Volt Amps (VA). The datasheets do also state the wattage of each inverter.

If you are still unsure of which Victron inverter charger you need, you are very welcome to contact our technical support team where one of our experts will happily give you the advice you need.

What Victron inverter charger models do you stock?

There are a number of Victron inverter charger models available, and at BMS Technologies, we are proud to stock them all. These include MultiPlus, Quattro, EasySolar and EasyPlus.

Within the range of models, you will find a choice of voltage, peak power and Bluetooth compatibility to suit your individual needs.

Need help making the right choice? Please feel free to contact our technical support team for the advice you need.

How does an inverter charger work?

An inverter charger forms a key component in any Energy Storage System (ESS).

The inverter supplies battery-powered energy to get you through those times when the grid has gone down, or you want to purposely go off-grid to take advantage of low cost tariffs.

The charger connects the inverter to an AC power source so that the batteries are continuously charged whilst the power is available. Even where a system is primarily connected to harvest power from solar panels, the inverter charger provides that added freedom of being able to connect to the grid anytime.

As well as making excellent Uninterrupted Power Supplies, ideal for both commercial and domestic use, inverter chargers are also commonly used with remote power systems, as they can automatically start a generator if the battery bank gets low.

What does pure sine wave mean?

Victron inverter chargers are built with pure sine wave inverters.

A pure sine wave inverter generates a waveform that is more in line with the smooth, regular waveform delivered by the grid. Modified sine waves or quaisi sine waves tend to be lumpy and uneven in comparison, resulting in sharp variations in voltage levels.

Pure sine wave inverters assist in reducing electrical noise, overheating and electrical component damage.

A pure sine wave inverter is more efficient than a square wave or quaisi sine wave inverter when converting DC to AC. This added efficiency ensures that power loss is kept to a minimum, which puts less pressure on your grid consumption.

If you need high quality, stable power that you can rely on, particularly if you are running medical equipment, appliances with motors such as refrigerators, sensitive electronics or a leisure vehicle, then a pure sine wave inverter is a must.

Why choose a Victron Energy inverter charger?

Victron inverter chargers are able to withstand extreme environments and unreliable power supplies. They charge rapidly, offer a good service and battery life, and are portable, robust and lightweight.

They also come with a 5-year warranty and, when you buy through BMS Technologies, free technical support is included as standard.

Can I control my Victron inverter charger remotely?

It is possible to combine a Victron inverter charger with a Cerbo Gx (also available from BMS), giving you control over your system wherever you are, as well as maximising performance.

Simply connect through the Victron Remote Management (VRM) portal, or access directly via Bluetooth where system compatibility allows.

Using Bluetooth, you can access your system remotely using the VictronConnect app or, if you have an internet connection to the Cerbo GX, you can access your system using the Victron VRM portal online.

Victron SmartSolar MPPT RS 450/200