Become a Victron Professional

Structured Pathway: Fundamental → Level 1 → Level 2 → Level 3 → Expert
Supports credibility when supporting prospective client installs, repairs and maintenence
Hands-On System Build & Commissioning
Certification Issued by Victron Energy
Become a Trusted Installer
Free Training

Why train with BMS Technologies?

As the UK’s largest Victron Energy distributor. We host the
offcial training, along with Victron Energy.

• Victron Online Professional Portal Modules
• Structured Classroom Learning
• Real-World System Design
• Physical System Build & Commissioning
• Direct Access to UK’s Largest Victron Stock Holding
• Official UK Victron Professional Training
• Dedicated Technical Support Team
• Commercial Account Support
• National Trade Network

This training is more than education.
It is access, credibility, and long-term partnership.

This is not theory-only training.
This is system-level expertise.
Delivered by professionals.

The Victron Energy Pathway

Victron Professional Fundamentals

Ideal for installers new to Victron or expanding into new sectors.

Course Agenda:

• Battery chemistry
• Choosing your battery
• Battery monitors
• Inverters & chargers
• MPPT controllers
• Core Victron architecture
• System design fundamentals
• (Wiring, fuses, isolators, environment)
• Fault finding and examples

Pre-work:
Sign up to Victron Professional Downloaded Victron Connect app Download Victron ToolKit

Victron Professional Level 1

Designed for installers actively working on small to mid-sized systems, single and three-phase.

Course Agenda:

• Inverter/charger, MPPT, and battery sizing/ selection
• Firmware updates
• Programming basics, including adding assistants
• GX device – genset start/stop,
• ESS, tank, and temperature monitoring
• CAN bus battery systems
• Grid meter options
• VRM – introduction and benefits
• Fault finding and examples

Practical focus

Programming a single-phase
system with CAN batteries
(firmware and settings)

Victron Professional Level 2

Demonstrating and practising system design with Victron

Course Agenda:

• For intermediate systems, covering paralleling and three-phase (up to 3 units)
• Sizing and component selection for projects (inverter/ charger, MPPT, battery
system)
• Configuration fundamentals using VE.Configure
• GX device – Genset start/stop, ESS, smart switching VRM monitoring and remote diagnostics
• Fault finding and examples

Practical focus:

• Hands on – parallel and three-phase system including programming.
• VRM data analysis for fault finding

Victron Professional Level 3

Spec • Build • Commission This is where technical competence develops.

Course Agenda:

• Large single and three-phase systems (more than three units)
• Project based – system specification exercises
• Hands on system build
• Configuration locally and remotely over VRM
• Troubleshooting techniques

Hands-on technical session:

• Spec a System
• Build a System
• Commission a System